DFC2 - GLENTRONICS PRO SERIES DELUXE CONTROLLER SYSTEM W/ DUAL VERTICAL FLOAT SWITCH

The dual float switch contains two large floating rings enclosed within a protective cage. Water will lift the bottom float by a ¼" , which will activate the pump. If for any reason the lower float does not activate the pump, the water will rise and activate the second switch. As the pump evacuates the water from the pit, the floats will drop. The pump will run for an additional 10 seconds (this setting is adjustable) to evacuate the pit completely after the float drops. The float switch wire includes a connector that can be separated from the controller when the wire needs to be threaded through small openings. The float switch connector has a safety locking pin. This pin will prevent the float switch from accidentally being disconnected from the controller. To remove the pin, push the pointed end of the pin into the float connector and pull it out from the other end. The float switch wire can now be disconnected. Make sure to reinstall the pin after the float switch is reconnected. Note: When mounting the float switch, position the bottom of the cage at the height you want the pump to activate.